Logger Script Zurich Instruments ::NUBICOM::
  • 빠른견적
  • 빠른견적&질문
New Products

MFLI / MFIA 사양

일반 사양

Storage temperature +5°C to +65°C
Storage relative humidity < 95%, non-condensing
Operating temperature +5°C to +40°C
Operating relative humidity < 90%, non-condensing
Specification temperature +18°C to +28°C
Power consumption < 40 W
DC power inlet 12 V, 2 A
Connector: Switchcraft 760BK, ID 2.5 mm, OD 5.5 mm
Power supply AC line 100 - 240 V (±10%), 50/60 Hz
Line power fuse 250 V, 2 A, fast, 5 x 20 mm, F 2A L 250V
Dimensions including bumper 28.3 x 23.2 x 10.2 cm
11.1 x 9.1 x 4.0 inch
Rack mount on request
Weight including bumper 3.8 kg
Recommended calibration interval 2 years (see sticker on back panel)
Warranty 1 year, extensible


복조기

Frequency range 0 to 500 kHz; 0 to 5 MHz, requires MF-F5M option
Number of demodulators 1 dual-phase (X, Y, R,Θ); 4 dual-phase, requires MF-MD option
Demodulator inputs Signal Inputs (V/I), Auxiliary Inputs, Auxiliary Outputs, Trigger Inputs
Filter time constant 336 ns - 83 s
Filter bandwidth (-3 dB) 276 µHz - 206 kHz (4th order filter)
Harmonics 1 - 1023
Filter slope 6, 12, 18, 24, 30, 36, 42, 48 dB/oct
Additional filtering Sinc filter
Phase resolution 10 µdeg
Frequency resolution 1 µHz
Output sample rate on Auxiliary Outputs 612 kSa/s (for each auxiliary output), 18 bit, ±10 V
Maximum transfer rate over 1 GbE 200 kSa/s (all demodulators), 48-bit full range
Maximum rate to store on local USB drive 50 kSa/s (all demodulators), 48-bit full range
Trigger modes for data transfer Continuous, edge, gated


레퍼런스 모드

External reference frequency range 1 Hz to 500 kHz; 1 Hz to 5 MHz, requires MF-F5M option
External reference input Auxiliary Inputs, Trigger Inputs, Auxiliary Outputs, Current Signal Input, Voltage Signal Input
Lock time for external reference Typically less than max(100 cycles, 1.2 ms)
Number of external references 1; 2 requires MF-MD option
Internal reference frequency range DC to 500 kHz; DC to 5 MHz, requires MF-F5M option


스코프

Input channels Signal Inputs (V,I), Auxiliary Inputs, Auxiliary Outputs, Trigger Inputs, Trigger Outputs, Signal Output, Oscillator Phase
Scope modes Time domain, frequency domain (FFT)
Number display channels 1; 2, requires MF-DIG option
Trigger channels Signal Inputs (V,I), Auxiliary Inputs, Auxiliary Outputs, Trigger Inputs, Trigger Outputs
Trigger modes Edge
Trigger hysteresis Full input range
Pretrigger Full sample range
Sampling rates 1.8 kSa/s to 60 MSa/s
Vertical resolution 16 bit
Maximum number of samples per shot 16 kSa; 2.5 MSa per channel, requires MF-DIG option
Minimum hold time 1 ms
Bandwidth limit mode, vertical resolution increase Down sampling by averaging; increase vertical resolution up to 24 bit, requires MF-DIG option
Cursor math Location, Area, Wave, Peak, Tracking, Histogram


스펙트럼 분석기

Center frequency range 0 to 500 kHz; 0 to 5 MHz, requires MF-F5M option
Spectrum modes FFT(X+iY), FFT(R), FFT(Θ), FFT(f) and FFT((dΘ/dt)/2π)
Statistical options Amplitude, Spectral density, Power
Averaging modes None, Exponential moving average
Maximum number of samples per spectrum 8 kSa
Maximum span 58 kHz
Window functions Rectangular, Hann, Hamming, Blackman Harris
Cursor math Location, Area, Tracking, Wave, Peak, Histogram


스위퍼

Scan parameters Oscillator frequency, Demodulator phase, Auxiliary Offset, Signal Output Offset, etc.
Parameter sweep ranges Full range, Linear and Logarithmic
Parameter sweep resolution Arbitrary, defined by start/stop value and number of sweep points
Display parameters Demodulator Output (X, Y, R, Θ, f), Auxiliary Input
Display options Single Plot, Dual Plot (e.g. Bode Plot), Multi-trace
Statistical options Amplitude, Spectral density, Power
Preset measurement modes Parameter sweep, Noise amplitude measurement, Frequency response analyzer, 3-Omega-Sweep


전압신호입력

Connectors 2 BNC on front panel, single ended and differential
Shield connectivity Floating or ground
Maximum float voltage versus ground ±1V
Input impedance 50 Ω and 10 MΩ; 27 pF for range >=300 mV; 35 pF for range <= 100 mV
Input frequency range DC to 500 kHz; DC to 5 MHz, requires MF-F5M option
Input A/D conversion 16 bit, 60 MSa/s
Input noise amplitude 2.5 nV/√Hz above 1 kHz for 3.3 mV input range and shorting cap on input; 7 nV/√Hz at 10 Hz, 40 nV/√Hz at 1 Hz
Input noise corner frequency Typically 100 Hz for range <= 10 mV
Input bias current Typically ±10 pA, max ±200 pA
Input full range sensitivity
(10 V lock-in amplifier output)
1 nV to 3 V
Input AC ranges ±1 mV to ±3 V, 8 steps
AC coupling cutoff frequency 1.6 Hz
Maximum DC offset for AC coupling ±10 V
Input DC ranges 1 mV to 3 V, 8 steps
Input gain inaccuracy < 1% (< 2 MHz); for higher frequencies limited by analog input filter
Analog input filter (anti-aliasing) 1 dB suppression at 5 MHz, 3 dB at 12 MHz; 3rd order roll-off
Input amplitude stability 0.1%/°C
Input offset amplitude < max(0.5 mV, 1% of range)
Dynamic reserve Up to 120 dB
Harmonic distortion 80 dBc for frequencies <= 100 kHz; 65 dBc for frequencies <= 5 MHz; carrier amplitude 1 dBFS
Coherent pickup < −140 dB for frequencies <= 5 MHz and 50 Ω input impedance;
< −180 dB for frequencies <= 100 kHz and 50 Ω input impedance


전류신호입력

Connector BNC on front panel, float/gnd
Shield connectivity Floating or ground
Maximum float voltage versus ground ±1 V
Input impedance see Table 5.9
Input frequency range DC to 500 kHz; DC to 5 MHz, requires MF-F5M option
Input A/D conversion 16 bit, 60 MSa/s
Input noise amplitude 20 fA/√Hz above 100 Hz for 10 nA input range; 200 fA/√Hz above 10 kHz for 1 µA input range; 3.5 pA/√Hz above 1 MHz for 100 µA input range; 300 pA/√Hz above 1 MHz for 10 mA input range;
Input leakage current ±10 pA
Input full range sensitivity
(10 V lock-in amplifier output)
±10 fA to ±10 mA
Input gain inaccuracy < 1% (for frequencies below 10% of the input bandwidth)
Input offset amplitude 1% of range
Dynamic reserve up to 120 dB
Coherent pickup < 90 GΩ for frequencies <= 5 MHz and 100 μA input range
< 140 TΩ for frequencies <= 100 kHz and 10 nA input range

Current input range Transimpedance
gain
Bandwidth (-3 dB) Input impedance
at DC
10 mA 100 V/A 5 MHz 50 Ω
100 µA 10 kV/A 5 MHz 50 Ω
1 µA 1 MV/A 150 kHz 500 Ω
10 nA 100 M/A 2 kHz 10 kΩ


차동 신호 출력

Connectors 2 BNC on front panel, single ended and differential
Output impedance 50 Ω
Output frequency range DC to 500 kHz; DC to 5 MHz, requires MF-F5M option
Output frequency resolution 1 µHz
Output phase range ±180°
Output phase resolution 10 µdeg
Differential outputs Sine waves shifted by 180°
Output D/A conversion 16 bit, 60 MSa/s
Output amplitude ranges ±10 mV, ±100 mV, ±1 V, ±10 V (single ended on high-impedance)
Output power 24 dBm (±10 V, 250 mW), for each BNC
Output gain inaccuracy < 1% at 100 kHz for all output ranges
Maximum output drive current 100 mA
Output offset amplitude ±1 mV or 1% of range, whichever is bigger
Harmonic distortion 85 dBc for f < 100 kHz, 60 dBc for f < 5 MHz; for output ranges <= 1 V; 80 dBc for f < 100 kHz, 50 dBc for f < 5 MHz; for output range 10 V; carrier amplitude 1 dBFS
Analog adder Auxiliary Input 1 can be added to the signal output, ±10 V, DC-2 MHz

Output range Output noise density
(high load impedance setting)
RMS output noise
at 12 MHz bandwidth
10 mV 43 nV/√Hz 145 µVrms
100 mV 43 nV/√Hz 145 µVrms
1 V 48 nV/√Hz 161 µVrms
10 V 104 nV/√Hz 310 µVrms


AUX 입력

Connectors 2 BNC on the front panel
A/D converter 16 bit, 15 MSa/s
A/D analog bandwidth 5 MHz
Input impedance 1 MΩ
Amplitude ±10 V
Resolution 0.335 mV


AUX 출력

Connectors 4 BNC on the front panel
D/A converter 18 bit, 612 kSa/s
D/A analog bandwidth 200 kHz
Output impedance 50 Ω
Amplitude ±10 V
Resolution < 85 µV
Drive current 20 mA


트리거 입력

Connectors 2 BNC on the back panel
Trigger input impedance 1 kΩ
Frequency range external reference 1 Hz to 500 kHz; 1 Hz to 5 MHz, requires MF-F5M option
Trigger amplitude range ±5 V
Minimum pulse width 35 ns
Trigger level ±5 V, 3.66 mV resolution
Trigger hysteresis < 20 mV


트리거 출력

Connectors 2 BNC on the back panel
Trigger output impedance 50 Ω
Frequency range external reference 1 µHz to 500 kHz; 1 µHz to 5 MHz, requires MF-F5M option
Trigger amplitude 5 V


10 MHz 동기화

Connectors 2 BNC, 10 MHz clock input and output on the back panel
10 MHz input, impedance 50 Ω
10 MHz input, frequency range 9.98 to 10.02 MHz
10 MHz input, amplitude range 200 mV to 3 V
10 MHz output, impedance 50 Ω
10 MHz output, amplitude 1 Vpp into 50 Ohm, sinusoidal
]

내부 주파수 레퍼런스

Type TCXO
Initial accuracy < ±1.5 ppm
Long term accuracy/aging < ±1 ppm in the first year
Short term stability (0.1 s) < 2·10-10
Temperature coefficient 0.05 ppm/°C (@23°C)
Phase noise at 1 kHz -140 dBc/Hz
Phase noise at 10 kHz -150 dBc/Hz


접속성 및 기타

Host connection LAN, 1 GbE; USB 2.0, 480 Mbit/s
USB host 2 connectors on the back panel for mass storage or WLAN modules
DIO, digital I/O 4 x 8 bit, general purpose digital input/output port, 3.3 V TTL
VHDCI 68 pin female connector
Internal memory 4.7 GB for measurement data, 250 MB for settings files, 250 MB for log files


최대치

Parameter Lower Upper
Damage threshold Current Signal Input I -5 V +5 V
Damage threshold Voltage Input +V/-V Diff -12 V +12 V
Damage threshold Signal Output +V/-V -12 V +12 V
Damage threshold Aux Input 1,2 -12 V +12 V
Damage threshold Aux Outputs 1,2,3,4 -12 V +12 V
Damage threshold Clock 10 MHz In/Out -5 V +5 V
Damage threshold Trigger Out 1,2 -1 V +6 V
Damage threshold Trigger In 1,2 -8 V +8 V
Damage threshold DIO 32 bit -1 V +6 V
Damage threshold DC In 0 V 26 V


LabOne UI 요건

Operating systems Any, Web browser based
Input device Touch screen, keyboard, mouse
CPU 2+ cores, hardware accelerated rendering on browser
Browser Internet Explorer 10+, Firefox 27+, Chrome 36+, Safari 6+, Opera 23+
Connectivity 1 GbE, 100 MbE, USB 2.0


LabOne API 요건

Operating systems Windows 8.x 64bit, Windows 7 64bit
32-bit and 64-bit of Linux, Ubuntu 12.04 LTS (i386, AMD64), 64-bit systems require the IA32 extension
Mac OS X
CPU AMD K8 (Athlon 64, Sempron 64, Turion 64, etc.), AMD Phenom, Intel Pentium 4, Xeon, Celeron, Celeron D, Pentium M, Celeron M, Core, Core 2, Core i5, Core i7, Atom
RAM 4GB+
Connectivity 1 GbE, 100 MbE, USB 2.0
Supported Languages LabVIEW 2009 (32bit, 64bit) and later; Python 2.6x, 2.7x (32bit, 64bit); Matlab 2009 and later; C/C++
  • 가족친화우수기업
  • 청년친화 강소시업
사업자등록번호 : 220-86-72761대표이사 : 신동만대표전화 : 070-7872-0701팩스 : 02-2167-3801
(우)07299 서울특별시 영등포구 경인로 775 (문래동 3가, 에이스하이테크시티 3동 2층)