납땜 및 리워크(Rework) 시스템
The MFR-1100 Single Output Series is a highly versatile unit that is available with either a soldering/blade tips, soldering/rework cartridges or tweezer hand-piece. The MFR-1120 includes a solder/blade tip hand-piece (MFR-H2-ST2) and a workstand. See below for the list of tips available for the MFR-1120. Other accessories are also available.
SmartHeat® Technology includes a microprocessor controlled heating system that operates at lower temperatures and eliminates calibration time.
MFR-1100 units are designed for use with 5 different hand-pieces, including a desoldering option.
Each hand-piece has a large variety of cartridges and Tips for maximum flexibility
Ergonomic hand-piece helps ensure operator safety and comfort
Small bench top footprint
Can be combined with the MFR-2200 Dual Output Series for additional application options.
MFR-PS1100 MFR Single Output Power Supply
MFR-H2-ST2 Tip Soldering Hand-piece for the MFR Series
MFR-WSPT Soldering Workstand, Compatible with MFR-H2-ST2 Hand-piece
■ 기본 사양
대기 작동 온도
10 - 40°C
최대 봉합 온도
100 - 240 VAC
60 Watts(대기온도 22°C에서 채널당)
(3가닥) 183 cm 18/3 SJT
너비 x 깊이 x 높이
90mm x 297mm x 142mm
5-10 9 Ohms
인증서 / 마크
핸드 피스 케이블 길이
L=122cm (48"), 번 프루프, ESD 안전획득
Handle and Workstand
＜ 2 mV RMS
＜ 2 ohms
Idle Temperature Repeatability
+/- 1.1°C (2°F) in still air
Handle Cord Assembly Length
122cm - burn proof, ESD safe
Connector 8-pin circular DIN
Workstand W x D x H
100mm x 200mm x 100mm
0.69 kg (1.51 lbs)
Small brass brush for cleaning tips and cartridges.
Brass pad compatible with all MX, MFR and PS workstands.
Yellow sponge for use on all MX and MFR rectangular workstand.
Heat proof pad to help safely and quickly removing a tip or a cartridge from the hand-piece.
Green Solder Auto Sleep Workstand