■ 기본 사양
|Ambient Operating Temperature||10- 40°C (50°F - 104°F)|
|Maximum Enclosure Temperature||55°C (131°F)|
|Input Line Voltage||100- 240 VAC, grounded circuit|
|Input Line Frequency||50/60 Hz|
|Power Consumption||125 Watts|
|Output Power Maximum||80 Watts max. Per channel at 22°C (when operated with two hand-pieces dynamically, the 80 watts output power is is shared based on demand)|
|Output Frequency||13.56 MHzC|
|Power Cord 3-Wire||183cm (18/3") SJT|
|Dimensions w x d x h||12.1cm x 13.0cm x 23.5cm|
|Certification / Marking||cTUVus, CE|
|Tip-to-Ground Potential||＜ 2mV|
|Tip-to-Ground Resistance||＜ 2 ohms|
|Idle Temperature Stability||± 1.1°C (2°F) in still air|
|Hand-piece Cable Length||L=178cm (70"), burn resistant, ESD safe|
|Hand-piece Connector||F connector|
|Workstand Dimensions w x dx h||8.6cm x 19.1cm x 8.3cm|
|Weight of the power supply||7.4 lbs (3.35 kg)|
|Weight of the * workstand||1.05 lbs (.476 kg)|
Yellow sponge for use on all MX and MFR rectangular workstand.
Heat proof pad to help safely and quickly removing a tip or a cartridge from the hand-piece.
Brass pad compatible with all MX, MFR and PS workstands.
Soldering and Rework cartridge hand-piece for the MX-5000 and MX-5200 Series Systems.
Grip for Metcal Advanced Hand-piece MX-H1-AV with black sleeve in scallop pattern
Solder Workstand for MX-5000 and MX-5200 Series.
Replacement part for MX-W4PT Solder and Rework workstand.
Tweezer Workstand for MX-5000 and MX-5200 Series.
Replacement part for MX-W1AV Solder and Rework workstand.