Logger Script MX-5251 - METCAL ::NUBICOM::
퀵메뉴 견적문의 상담문의 수리교정
itestshop
itesotshop
top
부대용품
METCAL
제품

metcal

MX-5251

납땜, 땜납 제거, 및 리워크(Rework) 시스템

MX-5251
스루홀 땜납 제거, 일반 납땜 및 SMD 리워크 애플리케이션을 위한 것으로, 두 핸드피스인 Advanced™ 핸드피스와 MX-DS1 땜납 제거 핸드피스가 포함되어 있습니다. 혼합 기술 보드에 이상적이며, 납땜과 리워크 작업에 다목적
땜납 제거 카트리지: STDC 시리즈
납땜 카트리지: STTC, SMTC 시리즈
데이터 시트 :MX-5200 (Dual Simultaneous)
주요 특장점
  • Can be operated with two hand-pieces dynamically sharing the 80 watts output power based on demand adding even more application flexibility and speed.
  • Configured with the Metcal Desoldering Gun and the Advanced Soldering and Rework Hand-piece.
  • Microprocessor controlled power supply providing more power for challenges such as high mass components, multi-layered boards and lead-free solders.
  • Improved ergonomics with lightweight hand-pieces.
  • Greater process control with SmartHeat® Technology.
  • ESD safe with incoming AC ground monitoring circuitry.
  • Built-in power indication meter with digital display and bar graph that dynamically provides the operator with feedback on the status of the soldering operation.
  • Metcal TipSaver™ Workstand improves tip life with its "Auto-Sleep" function.
제품 구성
  • MX-PS5200: Power supply, 100 to 240 VAC input, dual switch port with LCD Display
  • MX-H1-AV: Metcal Advanced™ Hand-piece, Soldering and Rework with one cartridge removal pad
  • MX-DS1 : Desoldering Gun Hand-piece with one cartridge removal pad
  • MX-W1A : Workstand for Metcal Advanced™ Hand-piece, Soldering and Rework with one sponge and one brass pad
  • MX-W5DS : Workstand for Desoldering Gun Hand-piece with one sponge and one brass pad
  • AC-CB1 : Desolder Chamber Cleaning Brush
  • AC-CB2 : Tube Cleaning Brush
  • MX-DCF1 : Chamber Liner and Filter Pack
  • AC-TC : Desolder Tip Cleaner
  • MX-RM8E : Desoldering Cord
  • MX-DAH4 : ESD Air Hose with Fitting

■ 기본 사양

주변 작동 온도 10- 40°C (50°F - 104°F)
최대 외함 온도 55°C
입력 선로 전압 100- 240 VAC, 접지 회로
입력 선로 주파수 50/60 Hz
정격 소비 전력 125W
출력 전력 싱글 모드: 최대 80W. 채널당*
듀얼 모드: 80W. 동적으로 공유*
출력 주파수 13.56MHz*
전원 공급기 크기(너비 x 깊이 x 높이) 12.1cm x 13.0cm x 23.5cm
인증 / 마킹 cTUVus, CE
팁과 접지 간 전위 2mV 미만
팁과 접지 간 저항 2옴 미만
유휴 온도 안정성 ±1.1°C(정체 공기 중)
핸드피스 케이블 길이 L=182cm(72"), 탐 방지, ESD 보호
핸드피스 커넥터 F 커넥터
전원 공급기 무게 3.35 kg

* RF 스마트 히트 기술은 더 큰 전력을 제공합니다.

MX-RM8E

MX-RM8E

For use on the MX-DSI Desoldering Gun on the MX-500, MX-5000 and MX-5200 soldering and rework Series Systems.

MX-DVC1

MX-DVC1

Venturi cartridge for MX-DS1 Desoldering Hand-piece

MX-DSL2

MX-DSL2

Seal cartridge for MX-DS1 Desoldering Hand-piece

MX-DSL1

MX-DSL1

Seal chamber for MX-DS1 Desoldering Hand-piece

MX-DSB

MX-DSB

Swivel Connector for MX-DS1 Desoldering Hand-piece

MX-DMK1

MX-DMK1

Maintenance kit for MX-DS1 Desoldering Hand-piece

MX-DLA

MX-DLA

Desolder Gun latch adjustment for MX-DS1 Desoldering Hand-piece

MX-DCF1L

MX-DCF1L

Chamber liners for MX-DS1 Desoldering Hand-piece

MX-DCF1F

MX-DCF1F

Filters for MX-DS1 Desoldering Hand-piece

MX-DCF1

MX-DCF1

Chamber liners and filters for MX-DS1 Desoldering Hand-piece

MX-DAH4

MX-DAH4

ESD Air Hose for MX-DS1 Desoldering Hand-piece

MX-DS1

MX-DS1

Desoldering Gun for the MX-500, MX-5000 and MX-5200 soldering and rework Series Systems.

AC-TC

AC-TC

Set of 12 Rods Sizes 0.50mm - 1.65mm to remove unwanted solder and flux build-up from desoldering tip

AC-CP2

AC-CP2

Heat proof pad to help safely and quickly removing a tip or a cartridge from the hand-piece.

AC-Y10

AC-Y10

Yellow sponge for use on all MX and MFR rectangular workstand.

AC-BRUSH-P

AC-BRUSH-P

Small brass brush for cleaning tips and cartridges.

AC-BP

AC-BP

Brass pad compatible with all MX, MFR and PS workstands.

  • 가족친화우수기업
  • 청년친화 강소시업
사업자등록번호 : 220-86-72761대표이사 : 신동만대표전화 : 070-7872-0701팩스 : 02-2167-3801
(우)07299 서울특별시 영등포구 경인로 775 (문래동 3가, 에이스하이테크시티 3동 2층)