Logger Script Workstands - METCAL ::NUBICOM::
퀵메뉴 견적문의 상담문의 수리교정
itestshop
itesotshop
후지쯔
top
top
부대용품
METCAL
제품

metcal

MX-W1AV

TipSaver Solder Workstand

MX-W1AV

Solder Workstand for MX-5000 and MX-5200 Series.

Features and Benefits :
  • For MX-H1-AV Advanced and MX-H2-UF Ultra Fine Hand-pieces.
  • Improves tip life by reducing the power to the hand-piece when placed in the workstand.
  • Gives user a choice for configuration with soft, coiled brass tip cleaner or with both the brass cleaner and the traditional sponge holder.
  • An adjustable angle cradle allows operators to select and lock the preferred angle for tool placement.

MX-W4PT

TipSaver Tweezer Workstand

MX-W4PT

Tweezer Workstand for MX-5000 and MX-5200 Series.

Features and Benefits :
  • For MX-PTZ Tweezer Hand-piece.
  • Improves tip life by reducing the power to the hand-piece when placed in the workstand.
  • Gives user a choice for configuration with soft, coiled brass tip cleaner or with both the brass cleaner and the traditional sponge holder.
  • An adjustable angle cradle allows operators to select and lock the preferred angle for tool placement.

WST

Talon Tweezer Workstand

WST

Talon Tweezer hand-piece for MX-500 Series Systems

Features and Benefits :
  • For use only with MX-TALON hand-piece.

MX-W4CR

Replacement cradle for MX Tweezer Workstand

MX-W4CR

Replacement part for MX-W4PT Solder and Rework workstand.

MX-W5DS

TipSaver Desolder Workstand

MX-W5DS

Desolder Workstand for MX-5000 and MX-5200 Series.

Features and Benefits :
  • For MX-DS1 Desolder Hand-piece.
  • Improves tip life by reducing the power to the hand-piece when placed in the workstand.
  • Gives user a choice for configuration with soft, coiled brass tip cleaner or with both the brass cleaner and the traditional sponge holder.
  • An adjustable angle cradle allows operators to select and lock the preferred angle for tool placement.

MX-W1CR

Replacement cradle for MX Solder and Rework Workstand

MX-W1CR

Replacement part for MX-W1AV Solder and Rework workstand.

MX-WHPDC

Workstand for Dual Cartridge Hand-Piece

MX-WHPDC

Dual Hand-Piece Workstand only. For Hand-Piece and cartridges, please see list below.

The success of conduction soldering depends upon the availability and controlled flow of thermal energy into the connection during two critical phases – flux activation and intermetallic bond formation. Higher thermal demand applications such as microwave shields, heavy block type housing and tabbing, preheat applications, BGA removal as an alternative to convection, cell phone shields, and industrial lugs and leads require additional thermal energy during these critical phases.
To address these challenging applications, Metcal offers the MX-HPDC dual cartridge hand-piece with the MX-WHPDC workstand for use with the MX series power supplies, along with a new series of 5 SMTC dual-shaft cartridges. Dual shaft cartridges are available with 700 & 800 series heaters.

Recommended configurations :
  • One MX-5200 power supply in dual-simultaneous mode to provide 40W of power to both heaters
  • Two MX-5200 power supplies to provide 80W of power to both heaters
Complete your workstand with :
  • MX-HPDC - Dual Cartridge Hand-Piece
  • SMTC-xCH75D - Dual Cartridge Chisel, 7.5mm
  • SMTC-xCH100D - Dual Cartridge Chisel, 10mm
  • SMTC-xCH150D - Dual Cartridge Chisel, 15mm
  • SMTC-xDRH75D - Dual Cartridge, Hoof, Drag, 7.5mm
  • SMTC-xCHB100D - Dual Cartridge Chisel, Bent, 10mm
Also available :
  • MX-UK3 - Upgrade Kit, MX-HPDC Hand-Piece & MX-WHPDC Workstand

MX-W5CR

Replacement cradle for MX Desolder Workstand

MX-W5CR

Replacement part for MX-W5DS Desolder workstand.

  • 가족친화우수기업
  • 청년친화 강소시업
사업자등록번호 : 220-86-72761대표이사 : 신동만대표전화 : 070-7872-0701팩스 : 02-2167-3801
(우)07299 서울특별시 영등포구 경인로 775 (문래동 3가, 에이스하이테크시티 3동 2층)