R&S®FPL1000은 오실로스코프 또는 멀티미터처럼 RF 연구소의 필수 기기입니다. 한 대의 기기로 다양한 측정 작업을 지원합니다.스펙트럼 분석뿐만 아니라 파워 센서를 이용한 매우 정확한 전력 측정, 아날로그 및 디지털 변조 신호의 분석을 지원합니다.
The R&S®FPL1000 spectrum analyzer makes measuring fast and simple. The intuitive touchscreen is straightforward and easy to use. With its solid RF performance, light weight and small footprint, the R&S®FPL1000 combines the functionality of a benchtop instrument with the portability of a handheld instrument.
In an RF lab, the R&S®FPL1000 is as indispensable as an oscilloscope or multimeter. It is a single measuring instrument for a variety of measurement tasks. It supports not only spectrum analysis, but also highly accurate power measurement with power sensors and analysis of analog and digitally modulated signals.
주요특징
- 주파수 범위 5kHz ~ 7.5GHz
- SSB 위상 노이즈: 10 kHz(1 GHz 반송파) 오프셋에서 일반적으로 –108 dBc(1 Hz)
- 프리앰프 사용 시 DANL: 10 MHz ~ 2 GHz에서 일반적으로 –166 dBm
- Lightweight with small footprint
- 적은 설치 면적 및 가벼운 무게
- 40 MHz 분석 대역폭(옵션)
- Internal signal generator
기능 & 장점
한 대의 기기를 다양한 용도에 활용
여러 유형의 측정을 수행할 수 있는 단일 측정 기기
R&S®FPL1000은 스펙트럼 측정, 파워 센서를 이용한 고정밀 파워 측정, 아날로그 및 디지털 변조 신호 분석에 사용할 수 있습니다.
- Spectrum analysis
- Signal analysis
- Power measurements with power sensors
뛰어난 RF 성능
- Low spurious responses
- Low displayed average noise level (DANL)
- Signal analysis bandwidth 40 MHz
- Low level measurement uncertainty
- Precise spectral measurements due to low phase noise
직관적 사용자 인터페이스
- High-resolution display
- Multipoint touchscreen
- Flexible arrangement of results and MultiView
- Toolbar
- Quiet operation
완벽한 이동성
- Battery pack and 12/24 V power supply
- Carrying bag and shoulder harness
- Low power consumption
R&S FPL1000 사양
Frequency
|
Frequency range |
|
5 kHz to 3 GHz |
|
Aging per year |
1 × 10–6 |
|
with R&S®FPL1-B4 option |
1 × 10–7 |
Frequency resolution |
|
0.01 Hz |
Bandwidth
|
Resolution bandwidth (–3 dB) |
sweep filters |
100 kHz to 10 MHz in 1/2/3/5 sequence |
|
FFT filters |
1 Hz to 50 kHz in 1/2/3/5 sequence |
I/Q demodulation bandwidth |
|
10 MHz |
|
with R&S®FPL1-B40 option |
40 MHz |
Displayed average noise level (DANL)
|
RF preamplifier off |
5 MHz ≤ f < 2 GHz |
–152 dBm (typ.) |
RF preamplifier on (option R&S®FPL1-B22) |
10 MHz ≤ f < 2 GHz |
–167 dBm (typ.) |
Intermodulation
|
|
1 dB compression of input mixer |
+7 dBm (nom.) |
|
third-order intercept point (TOI) 300 MHz ≤ fin < 3 GHz |
+20 dBm (typ.) |
Phase noise |
f = 1 GHz, 10 kHz frequency offset |
–108 dBc (1 Hz) (typ.) |
Total measurement uncertainty |
1 MHz ≤ f < 3 GHz |
0.5 dB |
R&S FPL1000 옵션정보
|
옵션 모델 |
설명 |
하드웨어 |
R&S®FPL1-B4 |
OCXO Accurate Reference Frequency |
R&S®FPL1-B5 |
Additional Interfaces |
R&S®FPL1-B10 |
GPIB Interface |
R&S®FPL1-B19 |
Second Hard Disk (SSD) |
R&S®FPL1-B22 |
RF Preamplifier |
R&S®FPL1-B25 |
1 dB Steps for Electronic Attenuator |
R&S®FPL1-B30 |
DC Power Supply for 12/24 V supply |
R&S®FPL1-B31 |
Li-Ion Battery Pack |
R&S®FPL1-B40 |
40 MHz Analysis Bandwidth |
소프트웨어 |
R&S®FPL1-K7 |
AM/FM/φM Analog Modulation Analysis |
R&S®FPL1-K9 |
Measurements with R&S®NRP Power Sensors |
R&S®FPL1-K30 |
Noise Figure Measurements |