Logger Script R & S FS-K96 OFDM 벡터 신호 분석 소프트웨어 - Rohde & Schwarz ::NUBICOM::
top
New Products

R&S FS-K96 OFDM 벡터 신호 분석 소프트웨어

  • 개요
  • 주요 특장점
  • 주요 기능
  • 옵션 정보
  • 문서 자료
  • 동영상

FS-K96 OFDM 분석 소프트웨어는 로데슈바르츠의 신호 및 스펙트럼분석기 모델들인 FSQ, FSG, FSV, SVR, FSW 등과 모델 FSUP 신호 소스 분석기의 기능을 확장하여 일반적인 OFDM 신호의 변조 측정을 합니다. OFDM 복조기는 사용자가 구성 할 수 있는 표준-독립적(standard-independent) 제품입니다.

주요특징

  • FSQ, FSG, FSV, FSV 신호 및 스펙트럼 분석기, 그리고 FSUP 신호 소스 분석기의 기능 확장으로 일반 OFDM 신호에 대한 송신기 측정
  • 사용자 정의 및 표준 독립 OFDM 복조기
  • 캡처된 신호에서 구성 파일을 쉽게 설정할 수 있는 단계별 가이드가 있는 마법사
  • OFDM 및 OFDMA 지원
  • 모든 PSK 또는 QAM 변조 형식 지원 (최대 4096 QAM)
  • 모델에 따라 20 MHz ~ 3, 8, 26.5, 40 GHz의 주파수 범위
  • DVB-T, 2k 모드 (FSQ)에 대해 매우 낮은 잔류 EVM < –51 dB
  • RF 측정 또는 선택적 I/Q 베이스 밴드 측정
  • 구성 파일을 기반으로 한 이상적인 참조 신호 생성

주요 기능

The R&S®FS-K96 OFDM analysis software offers maximum flexibility for adapting the analyzer to signal requirements. Thanks to this flexibility, users can define frequency, bandwidths, sample rate and guard interval length for the relevant OFDM signal. Many other parameters can be modified as needed, e.g. memory depth or trigger settings.

User-configurable and standard-independent

  • The software offers a high degree of freedom when it comes to measurement parameters. In addition to the user-definable OFDM demodulator, general parameters such as trigger, synchronization and tracking can be set manually.


Numerous measurements for analyzing OFDM signals

  • In addition to a numeric table that lists EVM results or the I/Q offset, the R&S®FS-K96 software provides numerous graphical results that make error analysis easy.
  • Multiple windows can be configured easily to show the most important and most often used graphical results.
  • Flexible assignment of cyclic prefix length (e.g. for LTE)


User-definable OFDM parameters

  • General OFDM parameters such as signal bandwidth, sample rate, FFT length, cyclic prefix length
  • Preamble structure
  • Position of the pilots and data carriers
  • Modulation format of the data carriers

The general parameters can be entered directly in the R&S®FS-K96 application. A configuration file is available for additional OFDM parameters. This file allows users to define the OFDM demodulator in detail.



Basic settings

  • Basic OFDM parameters such as bandwidth, sample rate, FFT length and cycle prefix length can be directly defined allowing users to verify these parameters without a configuration file. Moreover, they can obtain measurement results for CCDF and various power measurements (power spectrum, power versus symbol, power versus carrier, power versus symbol and carrier).


Expanded settings by means of a configuration file

The configuration file defines all parameters of an OFDM signal in detail, thereby allowing the software to perform demodulation and further analysis of OFDM signals configured in almost any manner. This file lets users enter all parameters that the software requires in order to carry out frame synchronization and demodulation. Available results include the various EVM and channel measurements such as EVM for each carrier, group delay, or impulse response.



Configuration file features

  • The following user-defined information on can be entered:
    • Position and value of the pilot carriers
    • Position and modulation mode of the data carriers
    • Preamble structure
  • Easy-to-create file using the wizard or special MATLAB® class
  • Graphical display of the configuration file with allocation of pilot and data symbols
  • Sample system configuration files provided for following
    • WLAN 802.11a, 802.11g OFDM
    • WLAN 802.11ac
    • WiMAX 802.16 OFDM
    • DVB-T, DVB-H


Additional software settings

In addition to the parameters in the configuration file, parameters such as synchronization and tracking can also be set manually. These setting capabilities make error analysis easy. Plus, it is possible, for example, to compensate for the frequency error of the measurement signal in the measurement results by using the phase tracking feature.

The software also offers the following functions:

  • Frequency synchronization (based on pilots or data)
  • Time synchronization (to cyclic prefix or preamble)
  • Automatic modulation detection
  • Burst search support (accelerates the detection of burst signals)
  • Tracking of phase, timing and level

R&S FS-K96 OFDM 벡터 신호 분석 소프트웨어 옵션정보

  옵션 모델 설명
 옵션 FS-K96U Upgrade from FS-K96 to FS-K96PC
FSPC Licence Dongle
FS-K196 5G Air Interface Candidates

FS-K10xPC - 비디오

  • 가족친화우수기업
  • 청년친화 강소시업
사업자등록번호 : 220-86-72761대표이사 : 신동만대표전화 : 070-7872-0701팩스 : 02-2167-3801
(우)07299 서울특별시 영등포구 경인로 775 (문래동 3가, 에이스하이테크시티 3동 2층)