New Products
Home » 신호 및 스펙트럼 분석기 » 톱 클래스 제품
R&S FSMR 시리즈 측정 리시버
)
R&S의 FSMR 측정 수신기는 신호 발생기 및 고정 또는 조정 감쇠기의 교정과 관련된 측정 작업을 처리하도록 특별히 설계된 제품입니다.
주요특징
- 주파수 범위: 20 Hz ~ 3, 26.5, 43, 50 GHz
- + 30dBm ~ -140dBm의 넓은 측정 범위를 가진 고정밀 레벨 교정기
- 고 정밀 레벨 교정기
- 변조 분석기
- THD 및 SINAD 측정 기능이 있는 오디오 분석기
- NRP-Zxx 전력 센서 연결 용 전력계
- 고성능 스펙트럼 분석기
R&S FSMR 시리즈 측정 리시버 스펙
| R&S®FSMR3 | R&S®FSMR26 | R&S®FSMR43 | R&S®FSMR50 | |
| Frequency range | 20 Hz to 3.6 GHz | 20 Hz to 26.5 GHz | 20 Hz to 43 GHz | 20 Hz to 50 GHz |
| Reference frequency | aging: 1 × 10–7/year, optionally 2 × 10 –8/year | |||
| Absolute power measurement | using R&S®NRP-Zxx power sensor or external power meters | |||
| Uncertainty | with R&S®NRP-Z27/-Z37: 0.083 dB (up to 4.2 GHz, +15 °C to +35 °C) | |||
| Relative level measurement | ||||
| Measurement range | +30 dBm to –140 dBm, depending on frequency | |||
| Linearity (+20 dBm to –140 dBm) | ±0.01 dB ± 0.005 dB per 10 dB step | |||
| AM modulation measurements | ||||
| Modulation depth | 0 % to 100 % | |||
| Measurement uncertainty | 1 % of reading, 50 Hz to 50 kHz; 0.4 % of reading, 90 Hz to 150 Hz, in range from 5 % to 99 % |
|||
| Modulation frequency | 10 Hz to 100 kHz | |||
| Inherent distortion | 0.3 % | |||
| FM modulation measurements | ||||
| Frequency deviation | max. 500 kHz | |||
| Measurement uncertainty | 1 % of reading, 50 Hz to 100 kHz | |||
| Modulation frequency | 10 Hz to 200 kHz | |||
| Inherent distortion | 0.1 % | |||
| φM modulation measurements | ||||
| Phase deviation | max. 10 000 rad | |||
| Measurement uncertainty | 1 % of reading, 50 Hz to 100 kHz | |||
| Modulation frequency | 10 Hz to 100 kHz | |||
| Inherent distortion | 0.1 % | |||
| Audio measurements | ||||
| Frequency range | DC, 20 Hz to 1 MHz | |||
| Level ranges | 0.4 V, 4 V | |||
| Measurement uncertainty | 1 % of reading, 20 Hz to 100 kHz | |||
| Spectrum analyzer | ||||
| Frequency range | 20 Hz to 3.6 GHz | 20 Hz to 26.5 GHz | 20 Hz to 43 GHz | 20 Hz to 50 GHz |
| Resolution bandwidths | 10 Hz to 50 MHz; FFT filters: 1 Hz to 30 kHz; channel filters; EMI bandwidths | |||
| Video bandwidths | 1 Hz to 10 MHz | |||
| Displayed average noise level (RBW 1 Hz) | ||||
| 1 GHz | typ. –158 dBm | typ. –156 dBm | typ. –156 dBm | typ. –156 dBm |
| 26 GHz | - | typ. –151 dBm | typ. –151 dBm | typ. –151 dBm |
| 43 GHz | - | - | typ. –140 dBm | typ. –140 dBm |
| 50 GHz | - | - | - | typ. –133 dBm |
| Trace detectors | Max Peak, Min Peak, Auto Peak, Sample, RMS, Average, Quasi Peak | |||
| Phase noise | typ. –133 dBc (1 Hz) at 10 kHz from carrier, 640 MHz carrier frequency | |||
| Sweep time | ||||
| Span > 10 Hz | 2.5 ms to 16 000 s | |||
| Span 0 Hz (zero span) | 1 μs to 16 000 s | |||
| Image frequency rejection | ||||
| f < 3.6 GHz | typ. 110 dB | |||
| f > 3.6 GHz | - | 0 dB | ||
| f > 3.6 GHz, with R&S®FSMR-B2 option |
- | typ. 100 dB | ||
R&S FSMR 시리즈 측정 리시버 옵션정보
| 옵션 모델 | 설명 | |
| 하드웨어 | FSMR-B223 | YIG Preselection w/20 dB Preamplifier, 3.6 GHz to 26.5 GHz (not w/FSMR-B23, FSMR-B223, for FSMR26) |
| FSMR-B2 | YIG Preselection 3.6 GHz to 50 GHz for FSMR 50 for FSMR50 only | |
| FSU-B4 | OCXO, low aging/improved phase noise at 10 Hz carrier offset | |
| FSU-B9 | Tracking generator 100 kHz to 3.6 GHz | |
| FSU-B12 | Output Attenuator, 0 dB to 70 dB (Req. FSU-B9) | |
| FSMR-B18 | Removable Hard Disk | |
| FSMR-B19 | Second Hard Disk for FSMR-B18 (requires FSU-B9) | |
| FSMR-B23 | RF Preamplifier 3.6 GHz to 26 GHz for FSMR 26 (Req. FSU-B25, not w/FSMR-B2, FSMR-B223, for FSMR26 only) | |
| FSMR-B73 | Vector signal analysis for FSMR | |
| FSU-B24 | 30 dB Preamplifier, 100 kHz to 50 GHz (for FSU26, FSU43, FSU46, FSU50, not for FSU50) | |
| FSU-B25 | Electronic Attenuator, 0 dB to 30 dB, 20 dB Preamplifier(3.6 GHz) | |
| FSMR-Z2 | Attenuation Calibration Kit | |
| RT-ZA9 | N(m) Adapter for R&S®RT-Zxx oscilloscope probes | |
| 소프트웨어 | FSWP-K4 | Pulsed Phase Noise Measurements |
| FSMR-B2 | YIG Preselection, 3.6 GHz to 26.5 GHz (not w/FSMR-B23, FSMR-B223, for FSMR26) | |
| FSMR-B2 | YIG Preselection, 3.6 GHz to 43 GHz (not w/FSMR-B23, FSMR-B223, for FSMR26) | |
| FS-K15 | VOR/ILS Measurement Demodulator | |
| FS-K30 | App. Firmware for Noise Figure and Gain Measurements for FSP, FSU and FSQ | |
| FS-K40 | Application Firmware for Phase Noise Measurement | |
| FS-K5 | GSM/EDGE Application Firmware | |
| FS-K72 | 3GPP BTS/Node B FDD Application Firmware | |
| FS-K73 | 3GPP UE FDD Application Firmware | |
| FS-K74 | 3GPP HSDPA BTS Application Firmware | |
| FS-K76 | 3GPP TD-SCDMA BTS Application Firmware | |
| FS-K77 | 3GPP TD-SCDMA UE Application Firmware | |
| FS-K82 | CDMA2000® / IS-95 (cdmaOne) / 1xEV-DV BTS | |
| FS-K83 | CDMA2000®/1xEV-DV MS Application Firmware | |
| FS-K84 | CDMA2000®/1xEV-DO BTS Application Firmware | |
| FS-K85 | CDMA2000®/1xEV-DO MS Application Firmware |
Tel : +82-70-7872-0701Fax : +82-2-2167-3801
2F, ACE hightech city, 775, Gyeongin-ro, Yeongdeungpo-gu, Seoul, Korea
2F, ACE hightech city, 775, Gyeongin-ro, Yeongdeungpo-gu, Seoul, Korea