New Products
)
)
)
)
벡터 네트워크 분야에서 60년 이상의 현장 경험을 쌓은 로데슈바르츠는 ZNB 시리즈 벡터 네트워크 분석기로 이 분야의 새로운 기준을 세웠습니다. 이 제품의 주요 특징은 초 고속으로 측정하며, 초 정밀하고, 그리고 아주 쉽게 사용할 수 있다는 점이 특징입니다.
주요특징
- 9 kHz ~ 40 GHz의 주파수 범위
- 최대 140 dB의 넓은 동적 범위
- 짧은 스윕 시간 : 예) 401 포인트에 대해 4 ms
- 높은 온도 안정성 0.01 dB/°C
- 98 dB의 넓은 전력 스윕 범위
- 1 Hz ~ 10 MHz 범위의 다양한 IF 대역폭
- 수동 및 자동 교정
- 대형, 고해상도 12.1"화면
- 터치 스크린 사용자 인터페이스
- 2개 또는 4개의 포트
- 2개의 독립 발전기가 있는 4포트 모델
- 스위치 매트릭스를 사용하여 최대 48개의 포트로 확장
주요 기능
Designed to meet the highest standards
- Wide dynamic range from 9 kHz for fast measurements on high-blocking DUTs
- Excellent raw data for high basic accuracy
- High temperature stability for long calibration intervals
- Fast synthesizers for high measurement speed
Convenient characterization of active and passive RF components
- Fast embedding/de-embedding for impedance matching using virtual networks
- Mixed-mode S-parameters for balanced DUT characterization
- Redefined S-parameters for flexible test setup configuration
- Extensive analysis functions for efficient trace analysis
- Amplifier measurements with wide power sweep range and receiver step attenuators
- Time domain analysis for distance-to-fault (DTF) measurements and filter adjustment
- Frequency conversion measurements on mixers and amplifiers – fast and simple with two independent internal generators
Simple calibration – manual or automatic
- The right calibration method for every test application
- TSM (Through, Short, Match) – full calibration in only five steps
- Automatic calibration units with up to 24 ports
Network analysis made easy
- Flat and clear menu structures for efficient operation
- Optimal display configuration for each measurement task
High throughput in production
- Short measurement times
- High measurement speed due to wide dynamic range and optimized IF bandwidths
- Segmented sweep tailored to device under test
- Fast switching between instrument setups
- Handler I/O interface for control of external parts handlers
- GPIB interface with bidirectional data transfer saves time in production
Measurements with up to 48 ports
- Expanding the number of ports with switch matrices
- RFFE GPIO interface for direct control of frontend modules
- Easy configuration at the push of a button
- Fast measurements and excellent RF characteristics
- Matrix solutions for every application
A worthwhile investment
- Ready for the future
- Upgrading test systems without rewriting system software
- An analyzer that speaks the user's language
R&S ZNB 시리즈 벡터 네트워크 분석기 옵션정보
| 옵션 모델 | 설명 | |
| Hardware Options - Receiver Step Attenuator |
ZNB4-B31 | Receiver Step Attenuator, Port 1, for ZNB4 Frequency range: 9 kHz to 4.5 GHz |
| ZNB4-B32 | Receiver Step Attenuator, Port 2, for ZNB4 Frequency range: 9 kHz to 4.5 GHz |
|
| ZNB4-B33 | Receiver Step Attenuator, Port 3, for ZNB4 Frequency range: 9 kHz to 4.5 GHz |
|
| ZNB4-B34 | Receiver Step Attenuator, Port 4, for ZNB4 Frequency range: 9 kHz to 4.5 GHz |
|
| ZNB8-B31 | Receiver Step Attenuator, Port 1, for ZNB8 Frequency range: 9 kHz to 8.5 GHz |
|
| ZNB8-B32 | Receiver Step Attenuator, Port 2, for ZNB8 Frequency range: 9 kHz to 8.5 GHz |
|
| ZNB8-B33 | Receiver Step Attenuator, Port 3, for ZNB8 Frequency range: 9 kHz to 8.5 GHz |
|
| ZNB8-B34 | Receiver Step Attenuator, Port 4, for ZNB8 Frequency range: 9 kHz to 8.5 GHz |
|
| Accessories | Overview of Accessories for Network Analyzer from Rohde & Schwarz | |
| Hardware Options - Extended Power Range |
ZNB4-B24 | Extended Power Range for Four-Port ZNB4 Frequency range: 9 kHz to 4.5 GHz |
| ZNB4-B22 | Extended Power Range for Two-Port ZNB4 Frequency range: 9 kHz to 4.5 GHz |
|
| ZNB8-B22 | Extended Power Range for Two-Port ZNB8 Frequency range: 9 kHz to 8.5 GHz |
|
| ZNB8-B24 | Extended Power Range for Four-Port ZNB8 Frequency range: 9 kHz to 8.5 GHz |
|
| ZNB20-B22 | Extended Power Range for Two-Port ZNB20 Frequency range: 100 kHz to 20 GHz |
|
| ZNB20-B24 | Extended Power Range for Four-Port ZNB20 Frequency range: 100 kHz to 20 GHz |
|
| ZNB40-B22 | Extended Power Range for Two-Port ZNB40 Frequency range: 10 MHz to 40 GHz |
|
| Hardware Options - Other | ZNB-B1 (1316.1700.02) | Bias-Tees for Two-Port ZNB Frequency range: 100 kHz to 4.5/8.5 GHz |
| ZNB-B1 (1316.1700.04) | Bias-Tees for Four-Port ZNB Frequency range: 100 kHz to 4.5/8.5 GHz |
|
| ZNB-B2 | Second Internal Generator for Four-Port ZNB4/ZNB8 (Req. ZNB four-port model) | |
| ZNB20-B2 | SecondInternal Generator for Four-Port ZNB20 (Req. ZNB four-port model) | |
| ZNB-B4 | Precision Frequency Reference | |
| ZNB-B10 | GPIB Interface | |
| ZNB-B12 | Device Control (Req. for direct control of ZN-Z84 matrices) | |
| ZN-B121 | Direct Control Cable (Req. for direct control of ZN-Z84 matrices) | |
| ZN-B14 | Handler I/O (Universal Interface) | |
| ZN-B15 (1323.9355.02) | RFFE GPIO Interface Cannot be combined with ZNB-B1 |
|
| ZN-B15 (1323.9355.03) | RFFE GPIO Interface Includes current and voltage measurements, cannot be combined with ZNB-B1 |
|
| ZNB-B19 (1323.9490.02) | Additional Removable Harddisc 32 Bit | |
| ZNB-B19 (1323.9490.07) | Additional Removable Harddisc 64 Bit | |
| ZNB-B81 | DC Inputs | |
| ZNB4-B52 | Extended dynamic range for ZNB4 Two-Port instrument Frequency range: 9 kHz to 4.5 GHz |
|
| ZNB4-B54 | Extended dynamic range for ZNB4 Four-Port instrument Frequency range: 9 kHz to 4.5 GHz |
|
| ZNB8-B52 | Extended dynamic range for ZNB8 Two-Port instrument Frequency range: 9 kHz to 8.5 GHz |
|
| ZNB8-B54 | Extended dynamic range for ZNB8 Four-Port instrument Frequency range: 9 kHz to 8.5 GHz |
|
| Software Options | ZNB-K2 (1316.0156.02) | Time Domain (TDR) |
| ZNB-K20 (1326.8072.02) | Extended Time Domain Analysis Req. ZNB-K2 |
|
| ZNB-K4 | Frequency Conversion Req. ZVAB-B44 for control of external generators via the IEC/IEEE bus. |
|
| ZNB-K14 | Intermodulation Measurements Req. ZNB-K4 |
|
| ZNB-K17 | 10 MHz Receiver Bandwidth | |
| ZNB-K19 | Freq. Resolution 1 mHz Increases the frequency resolution of ZNB to 1 mHz |
|
| Upgrade Kits | ZNB-U64 | Upgrade Kit, 64-bit |
| Recommended Extras | ZZA-KN5 | 19" Rack Adapter For mounting a 19" housing 5 RU high in a standard 19" rack |
문서 자료
| 제목 | 다운받기 |
|---|---|
| R&S ®ZNB Vector Network Analyzer - 제품 브로슈어 | 다운로드 |
| Ground station testing on satellites in orbit | 다운로드 |
| Fully tuned for microwave and millimeterwave testing - 브로슈어 | 다운로드 |
R&S®ZNB 벡터 네트워크 분석기 - 비디오
사업자등록번호 : 220-86-72761대표이사 : 신동만대표전화 : 070-7872-0701팩스 : 02-2167-3801
(우)07299 서울특별시 영등포구 경인로 775 (문래동 3가, 에이스하이테크시티 3동 2층)
(우)07299 서울특별시 영등포구 경인로 775 (문래동 3가, 에이스하이테크시티 3동 2층)