Logger Script Zurich Instruments ::NUBICOM::
New Products

MF-IA 임피던스 분석기 옵션

  • 개요
  • 어플리케이션
  • 업그레이드
  • 상세 설명
  • 질문답변

The Zurich Instruments MF-IA is an upgrade option for the MFLI lock-in amplifier. It provides the full digital impedance analyzer and precision LCR meter functionality that sets the new standard for impedance measurements in the frequency range from DC to 500 kHz / 5 MHz. With the MF-IA option installed impedance can be measured with 0.05% basic accuracy and a measurement range spanning from 1 mΩ to 10 GΩ. The instrument has a high measurement repeatability and a small temperature drift. The LabOne® instrument control software offers a number of long-awaited innovations for the impedance and LCR measurement available without the need of any software installation.

MF-IA 주요 특징

  • DC to 500 kHz / 5 MHz, 1 mΩ to 10 GΩ, 0.05% basic accuracy
  • 20 ms measurement speed for basic accuracy
  • LabOne Sweeper for frequency, bias voltage, and test signal amplitude response measurements
  • Compensation Advisor and Confidence Indicator for accurate measurements
  • 25 s start-up time and high repeatability
  • LabOne APIs for C, MATLAB®, LabVIEW®, Python

MF-IA 어플리케이션

  • Life Sciences: Tissue impedance analysis, Single cell impedance spectroscopy (multi-frequency)
  • Electrochemistry: Batteries, Fuel cells, Corrosion
  • Electrical Engineering: Semiconductor wafer structures, Solar Cells, LED and LCD testing
  • Material Research: Quantum transport, Ceramics / Composites, Nanostructure characterization
  • Others: Scanning Capacitance Microscopy, Food reserach, MEMS sensors

MF-IA 업그레이드 및 호환성

  • All MFLI instruments with a serial high than DEV3200 can be upgraded in the field. Customers with earlier versions are kindly requested to et in touch with our customer support.
  • The MF-IA option is compatible with all other MF options.

MF-IA 상세 설명

The MFIA product page provides a detailed description of the MF-IA upgrade option including

MF-IA Upgrade Option Q & A

Are there different hardware configurations available?
No, all MF series instruments are based on the same hardware. Variations are firmware and software based and can be upgraded at any time later in the field. All options are compatible with each other.
Do I need a PC to run the instrument?
The MFIA has an embedded web server and can be connected to a local network where it can be accessed from any web browser by opening the address "http://mf-dev3XXX".
Does the MFIA achieve 0.05% accuracy over the entire frequency and measurement range?
No. Please see the reactance chart for a detailed specification of accuracy over the entire ranges.
How does the MFIA impedance analyzer relate to the MFLI lock-in amplifier?
The MFIA impedance analyzer and the MFLI lock-in amplifier with the MF-IA option installed are technically the same instruments. The only difference is the front panels and the organization of the user interface (e.g. ordering of the application icons).

Feature overview

The following table gives a quick overview of the main features affected by the MF-MD option and the MF-IA option.






Simultaneous demodulation of
current input and voltage input
Number of oscillators 1 1 4 4
Number of demodulators 1 2 4 4
Number of impedance units 0 1 0 2
Number of external references 1 1 2 2

The listed features are independent of the frequency range and other options installed on the instrument.

  • 가족친화우수기업
  • 청년친화 강소시업
사업자등록번호 : 220-86-72761대표이사 : 신동만대표전화 : 070-7872-0701팩스 : 02-2167-3801
(우)07299 서울특별시 영등포구 경인로 775 (문래동 3가, 에이스하이테크시티 3동 2층)